Soft-switching gate drive solution from Pre-Switch slashes solar inverter costs

October 10, 2019

 

Two-stage architecture and platform enables significant cost reduction and simplification of renewable energy systems;

Grid tie filter size slashed by up to 80%

 

 

 

October XX 2019, Campbell, Ca., USA: Pre-Switch, Inc., a Silicon Valley start-up that emerged from stealth mode last year, has announced that its revolutionary soft-switching IGBT and silicon carbide gate driver architecture, including the Pre-Drive™3 controller board, powered by the Pre-Flex™ FPGA, and RPG gate driver board, can significantly reduce the cost of solar inverters. The two-stage architecture delivers the same switching loss performance – or better – as a five-level design, resulting in reduced cost, control complexity and BOM count. Also, Pre-Switch enables the simplification and size reduction of inverters and filters used in renewable energy systems, enabling energy to be put back into the grid easily and efficiently.

The Pre-Switch soft-switching platform enables a doubling of power output for a typical inverter, or an increase in switching speed by a factor of up to 20 times. Previously, soft-switching has never been successfully-implemented for DC/AC systems with varying input voltage, temperature and load conditions. However, Pre-Switch has overcome the challenges by using Artificial Intelligence (AI) to constantly-adjust the relative timing of elements within the switching system required to force a resonance to offset the current and voltage wave forms – thereby minimizing switching losses. 

Explains Pre-Switch CEO, Bruce T. Renouard: “Our benefit for solar energy system designers is that our soft-switching architecture eliminates half of the system losses.  So we are able to achieve performance levels with a simple two stage design that would require five stages using conventional multi-level techniques.”`

He adds: “The architecture also allows the grid tie filter size to be reduced by up to 66.67% for IGBT systems and by up to 80% for SiC MOSFETs.  That is a huge advantage, not only in system size but also materials and shipping cost savings.”  

 

Pre-Switch: Further, Faster, Lighter, Cheaper – Cooler

Please reload

Email
info@pre-switch.com

Address
1875 S Winchester Blvd.

Suite 101

Campbell, CA 95008

United States of America

  • Pre-Switch Linkedin
If you are interested in making soft-switching work for you, please reach out here:
© 2018 - All rights reserved Pre-Switch, Inc.  Privacy policy